Welcome to Marine Graphics, a trading name of Beardsalls Print in Newport on the Isle of Wight. Toby Beardsall is a keen sailor and uses that knowledge to advise, produce and fit a wide range of Digital Media to boats, yachts and watercraft of all shapes and sizes. His understanding of the sport gives customers confidence that the right product is used in every project. All materials used are supplied by leading manufacturers including 3M, Hexis and Metamark. The production facility uses Roland Vg3 8 ink printers and Summa cutters to give the best possible results to your project. please feel free to call, email or use the web chat to discuss your requirements .

Doris - a 16ft Fiberglass yacht tender

Doris is a fiberglass motor launch built with a mock clinker chine. The project brief was to make the launch look more traditional. A Hexis CT9000 pre-printed ‘hardwood’ vinyl was used to do a full hull wrap. this was complemented by a white hi-tak waterline and logo/name. The hull was finished with a traditional rope fender.T

Firecrest - Targa 31

Firecrest had a very tired looking fly bridge combing. The owner prepared the old surface and a Metamark M7 Air-release vinyl was used to renew. This was applied in three sections with 2 overlapping joins. The ‘Targa 31’ logo was also replaced, but as this was unavailable in digital form, a tracing was taken from the original logo and colour matched against a Metamark M7 Swatched.

Pogo 37

This Yacht was previously wrapped using a 3M Cast Vinyl, but had sustained damage on the port side. The project involved cutting out and removing a section of vinyl and replacing the hull wrap and boot top.

This Beneteau 27.7 had very faded and crazed logo’s on the coach roof, these were removed and replaced using Metamark M7 chrome effect vinyl and a matching Navy Vinyl for the text and seahorse logo.

Stan is a Sigma 33 Charter boat that often asks for temporary graphics. Consilium sponsored the boat during Cowes Week 23, we were asked to logo the hull using standard M7 Vinyl, whilst the sail logo was applied using an Ultra Hi-Tak Digital print and laminated Vinyl. The boat was chartered on the ‘epic’ (windy) 2023 round the island race and had a temporary name change using Low-Tak Removable Vinyl, this was contour cut to match the shape of the stern.